Water Pump Accessories

Battery Holder 8A-42

Physical Size:
2 1/2 inch x 2 3/8 inch x 1 1/8 inch

Battery Size: AA
Output Voltage: 12 VDC
Expected Run Time: 12 Hours

Part No. 8A-42
Price: $2.00

Item Description:

This battery holder is the exact replacement for the one that is included with each VP II pump purchase.

Because it holds 8 batteries, it produces the maximum flow rate of the VP II pump.

Battery Holder 6A-61

Physical Size:
3 5/8 inch x 2 1/4 inch x 5/8 inch

Battery Size: AA
Output Voltage: 9 VDC
Expected Run Time: 12 Hours

Part No. 6A-61
Price: $2.00

Item Description:

Use this battery holder when 8 batteries produce too much water flow and 4 batteries produce too little water flow.

Battery Holder 4A-41

Physical Size:
2 5/8 inch x 2 1/2 inch x 3/4 inch

Battery Size: AA
Output Voltage: 6 VDC
Expected Run Time: 12 Hours

Part No. 4A-41
Price: $2.00

Item Description:

This battery holder works best for smaller fountain applications. It produces the lowest flow rate of the VP II pump. Use this battery holder when 6 or 8 batteries produce too much water flow. This battery holder also includes a removable cover and a built in on/off switch.

Battery Holder 8A-81

Physical Size:
4 3/4 inch x 2 3/8 inch x 5/8 inch

Battery Size: AA
Output Voltage: 12 VDC
Expected Run Time: 12 Hours

Part No. 8A-81
Price: $2.00

Item Description:

This battery holder will produce the maximum flow rate of the VP II pump and will produce the exact same results as the 8A-42. Because the batteries are configured a bit different, it may be more suitable in certain applications.

Battery Holder 8A-412

Physical Size:
2 1/2 inch x 2 3/8 inch x 1 1/2 inch

Battery Size: AA
Output Voltage: 6 VDC
Expected Run Time: 25 Hours

Part No. 8A-412
Price: $2.00

Item Description:

This battery holder works best for smaller fountain applications. Use this battery holder when 6 or 8 batteries produce too much water flow. It produces the lowest flow rate of the VP II pump but provides twice as much run time as the 4A-41.

Battery Holder 8C-42

Physical Size:
4 1/4 inch x 2 3/8 inch x 1 3/4 inch

Battery Size: C
Output Voltage: 12 VDC
Expected Run Time: 45 Hours

Part No. 8C-42
Price: $5.00

Item Description:

This battery holder produces the maximum flow rate of the VP II pump. It will produce the exact same flow rate as the 8A-42 and 8A-81 but will provide an increased run time of 45 hours.

Battery Holder 8D-42

Physical Size:
5 1/2 inch x 2 7/8 inch x 2 1/2 inch

Battery Size: D
Output Voltage: 12 VDC
Expected Run Time: 70 Hours

Part No. 8D-42
Price: $5.00

Item Description:

This battery holder produces the maximum flow rate of the VP II pump. It will produce the exact same flow rate as the 8A-42, 8A-81, and 8C-42 but will provide an increased run time of 70 hours.

Dummy Battery, DB-1

Part No. DB-1
Price: $5.00

Item Description:

The dummy battery allows you to fine tune the flow rate of the VP II pump when using AA batteries.

For example, you may discover that 8 AA batteries produce too much water flow and 6 AA batteries produce too little flow. Using one dummy battery in an 8 cell holder would be the equivalent to using a 7 cell battery holder. Using two dummy batteries in a 8 cell holder would be the equivalent to using a 6A-61 (6 cell holder).

Heavy Duty Fountain Bowl, S-872

Part No. S-872
Price: $10.00

Item Description:

This 1 ½ quart rolled edge heavy-duty stainless steel fountain bowl is the perfect size for our VP II pump.

It is a great beginning for creating and designing your own unique fountain or centerpiece.

Note: VP II pump is sold separately and is not included with the fountain bowl.
 

Clear Flexible Tubing, FT-12
1/2 inch inside diameter
x 5/8 inch outside diameter
Part No. FT-12
Price: $2.00/foot

Item Description:

Clear flexible tubing sold by the foot. This tubing fits perfectly over the outlet nipple of the VP II pump. Most fountains use some type of rigid or flexible tubing to elevate the water above the basin or reservoir.

Note: This item is sold by the foot.  Please adjust quantity in cart and click Update Cart for desired length.


 

Clear Flexible Tubing, FT-14
1/4 inch inside diameter
x 3/8 inch outside diameter

Part No. FT-14
Price: $1.00/foot

Item Description:

Clear flexible tubing sold by the foot. This tubing fits perfectly inside the outlet nipple of the VP II pump. Most fountains use some type of rigid or flexible tubing to elevate the water above the basin or reservoir.

Note: This item is sold by the foot.  Please adjust quantity in cart and click Update Cart for desired length.

Rigid Tubing, RT-14
1/4 inch inside diameter
x 3/8 inch outside diameter

Part No. RT-14
Price: $2.00/foot

Item Description:

Clear rigid tubing sold by the foot. This tubing will fit perfectly inside the outlet nipple of the VP II pump. Most all fountains use some type of rigid or flexible tubing to elevate the water above the basin or reservoir.

Note: Maximum Shipping Length is 2 Feet.

When ordering 2 Foot Length, please adjust quantity in cart and click Update Cart.

Rigid Tubing, RT-12
1/2 inch inside diameter
x 5/8 inch outside diameter

Part No. RT-12
Price: $2.00/foot

Item Description:

Clear rigid tubing sold by the foot. This tubing will fit perfectly over the outlet nipple of the VP II pump. Most all fountains use some type of rigid or flexible tubing to elevate the water above the basin or reservoir.

Note: Maximum Shipping Length is 1 Foot.